How to Read & Use a Macrame Pattern : This is a DIY jewelry tutorial for making Swarovski crystal and suede tassel earrings.
- “No.1229” (pattern or project number)
- Measurements in centimeters: 6cm, 14cm, 15cm, 2cm
- Letters A and B marking different sections
- Multiple rectangular outlines with what appear to be attachment or connection points (small circles at the corners)
Because the image has no written instructions beyond the numbers, I will provide a complete how-to guide, full meaning, and full understanding based on what these measurements typically represent in macrame and paracord projects.
How to Read & Use a Macrame Pattern Template (No.1229): Complete Guide
Full Meaning of the Diagram
| Element | Likely Meaning |
|---|---|
| No.1229 | Pattern catalog number (common in Japanese or European macrame pattern books) |
| 6cm | Height or width of a central section |
| A 14cm | Section A length = 14cm (possibly the main body of a bracelet, strap, or bag handle) |
| B 15cm | Section B length = 15cm (possibly a different section, or the total length including fringe/ends) |
| 2cm | Small margin, seam allowance, or loop length |
| Rectangular outlines | Different layers or sections of the project |
| Small circles | Attachment points (where cords pass through or where knots are tied) |
Possible Project Types
Given your previous files (bracelets, paracord projects, knot guides), this diagram could be one of the following:
| Project Type | How the Measurements Apply |
|---|---|
| Multi-section bracelet | A 14cm main body + 2cm loop + 15cm total length |
| Watch band | 6cm for the watch face area, 14cm for the strap |
| Bag handle | Two 15cm sections with a 6cm center grip |
| Keychain or lanyard | 14–15cm total length with 2cm loop at the end |
| Adjustable necklace | A 14cm fixed section + 15cm adjustable part |
Full Understanding: How to Interpret the Numbers
Scenario 1: Bracelet with Loop Closure
| Measurement | Meaning |
|---|---|
| 14cm (A) | Main knotted body of the bracelet |
| 2cm | The loop (at one end) that the clasp or knot passes through |
| 15cm (B) | Total length including the loop (14 + 1? or 14 + 2? = 16, so careful) |
If A = 14cm and the loop is 2cm, total could be 16cm. But B is labeled 15cm. This suggests:
- A and B are different sections, not added together
- Or B is the other end of the same bracelet
Scenario 2: Two-Part Project (e.g., Bag or Belt)
| Section | Length | Purpose |
|---|---|---|
| A | 14cm | Front panel or main decorative area |
| B | 15cm | Back panel or adjustable strap |
| 6cm | 6cm | Center connector or width |
| 2cm | 2cm | Fold-over seam or fringe length |
Scenario 3: Jig or Template for Tying
In macrame, you often create a tying jig (as in your LIND-Z pattern). This diagram could be the blueprint for a jig:
| Measurement | Jig Use |
|---|---|
| 6cm | Distance between two pegs for a small loop |
| 14cm | Main peg-to-peg distance for the bracelet body |
| 15cm | Maximum working length (including slack) |
| 2cm | Extra space for tightening |
How-To Guide: Using This Diagram for a Purple Macrame Bracelet
Let me assume this diagram is for a two-section bracelet with a loop closure — a common project type that fits your artisanal purple theme.
Step 1 — Determine the Project
Based on the numbers, you are making:
- A main body (14cm long)
- A loop end (2cm diameter or length)
- Total finished length approximately 15–16cm (suitable for a small to medium wrist, or an anklet)
Step 2 — Gather Materials
| Material | Specification |
|---|---|
| Purple macrame cord | 2–3mm thickness |
| Length needed | Approx. wrist size × 1.5 to 2 (e.g., 16cm wrist → 24–32cm of cord per strand) |
| Number of strands | Depends on pattern; typical: 4 to 8 strands |
Step 3 — Create the A Section (14cm)
Using your preferred knot (square knot, cobra, or shark jaw):
- Tie a knotted section exactly 14cm in length
- This becomes the main decorative body of the bracelet
Step 4 — Create the B Section (15cm)
The B section may be:
- Option 1: The other half of the bracelet (e.g., the back side or the adjustable tail)
- Option 2: A second identical panel that will be joined to the first
If B = 15cm and A = 14cm, the B section is 1cm longer — possibly for an adjustable sliding knot.
Step 5 — Add the 2cm Loop
At one end of the A section, create a 2cm loop:
- Fold the cords back and tie a knot
- The loop should be large enough to pass a button or diamond knot through
Step 6 — Add the 6cm Element
The 6cm measurement could be:
- A center decorative panel (e.g., a monkey’s fist or Pan Chang knot that is 6cm in circumference)
- The width of the bracelet (if it is a wide cuff)
- A separate small section (like a connector between A and B)
If it is a width measurement, your purple bracelet should be 6cm wide at its widest point.
Step 7 — Assemble
Follow the diagram’s layout:
- Start with the 2cm loop
- Then tie the 14cm A section
- Add the 6cm center element (if separate)
- Finish with the 15cm B section
Step 8 — Final Adjustments
Measure the finished project. Adjust knot tension so the sections match the diagram’s dimensions exactly.
Common Mistakes & Fixes
| Mistake | Cause | Fix |
|---|---|---|
| Sections don’t match diagram | Knot tension inconsistent | Use a ruler as you tie; check every 2cm |
| 2cm loop too small/big | Guessed instead of measured | Use a 2cm-wide template (e.g., a coin) to form the loop |
| 6cm width too wide for wrist | Misinterpreted measurement | 6cm is very wide for a bracelet; consider this might be a bag handle instead |
| A and B sections reverse | Mislabeled which end is which | Mark A and B on your project with tape |
Connecting to Your Previous Patterns
| Pattern | How No.1229 Could Be Used |
|---|---|
| Square knot bracelet | A = 14cm of square knots, B = 15cm of half-knots |
| Shark jaw bone | A = 14cm of shark jaw, B = 15cm of cobra finish |
| LIND-Z | A = 14cm of dense Z-weave, 2cm loop |
| Pan Chang knot | Place a 6cm Pan Chang knot in the center |
| Monkey’s fist | Use the 6cm measurement for the fist’s diameter |
Sample Project: Purple Artisanal Bracelet Using No.1229
Design:
- 2cm loop: Deep purple cord, single overhand knot
- 14cm A section: LIND-Z weave (dense diagonal) in light and dark purple
- 6cm center: Pan Chang knot in medium purple (approximately 6cm wide after tightening)
- 15cm B section: Shark jaw bone weave in lavender and violet
- Closure: Diamond lanyard knot (as in the shark jaw guide) that passes through the 2cm loop
Total finished length: Approximately 31cm (too long for a wrist — so this may actually be a lanyard or necklace)
Given the total of A+B (14+15=29cm) plus the loop and center, this project is likely a long lanyard, sunglass strap, or small bag handle, not a standard bracelet.
Final Pro Tip: Always Verify the Project Type
The diagram No.1229 does not specify what you are making. Before cutting cord:
- Check if the original source (book, magazine, or website) had a title or photo
- If 14cm + 15cm = 29cm is longer than your wrist (typically 15–20cm), then this is not a bracelet — it is a lanyard, belt, or strap
- Adjust the measurements proportionally for a bracelet: scale down by dividing all numbers by 2 (e.g., 7cm A, 7.5cm B, 3cm center, 1cm loop)
Summary: What No.1229 Teaches You
| Lesson | Takeaway |
|---|---|
| Patterns use letters (A, B) to label sections | Each section may have a different knot or color |
| Small measurements (2cm) are usually loops or margins | These are critical for closures and fit |
| Center measurements (6cm) are often focal points | Ideal for decorative knots like Pan Chang or monkey’s fist |
| Always verify total length before starting | 29cm is a lanyard, not a bracelet |
Would you like me to create a scaled-down version of No.1229 for a standard 7-inch (18cm) wrist bracelet, with all measurements converted and a suggested purple knot sequence?
Thank you for sharing this image. It appears to be a technical diagram or pattern template — likely for a macrame project, bag, strap, or decorative panel. The image shows:
- “No.1229” (pattern or project number)
- Measurements in centimeters: 6cm, 14cm, 15cm, 2cm
- Letters A and B marking different sections
- Multiple rectangular outlines with what appear to be attachment or connection points (small circles at the corners)
Because the image has no written instructions beyond the numbers, I will provide a complete how-to guide, full meaning, and full understanding based on what these measurements typically represent in macrame and paracord projects.
How to Read & Use a Macrame Pattern Template (No.1229): Complete Guide
Full Meaning of the Diagram
| Element | Likely Meaning |
|---|---|
| No.1229 | Pattern catalog number (common in Japanese or European macrame pattern books) |
| 6cm | Height or width of a central section |
| A 14cm | Section A length = 14cm (possibly the main body of a bracelet, strap, or bag handle) |
| B 15cm | Section B length = 15cm (possibly a different section, or the total length including fringe/ends) |
| 2cm | Small margin, seam allowance, or loop length |
| Rectangular outlines | Different layers or sections of the project |
| Small circles | Attachment points (where cords pass through or where knots are tied) |
Possible Project Types
Given your previous files (bracelets, paracord projects, knot guides), this diagram could be one of the following:
| Project Type | How the Measurements Apply |
|---|---|
| Multi-section bracelet | A 14cm main body + 2cm loop + 15cm total length |
| Watch band | 6cm for the watch face area, 14cm for the strap |
| Bag handle | Two 15cm sections with a 6cm center grip |
| Keychain or lanyard | 14–15cm total length with 2cm loop at the end |
| Adjustable necklace | A 14cm fixed section + 15cm adjustable part |
Full Understanding: How to Interpret the Numbers
Scenario 1: Bracelet with Loop Closure
| Measurement | Meaning |
|---|---|
| 14cm (A) | Main knotted body of the bracelet |
| 2cm | The loop (at one end) that the clasp or knot passes through |
| 15cm (B) | Total length including the loop (14 + 1? or 14 + 2? = 16, so careful) |
If A = 14cm and the loop is 2cm, total could be 16cm. But B is labeled 15cm. This suggests:
- A and B are different sections, not added together
- Or B is the other end of the same bracelet
Scenario 2: Two-Part Project (e.g., Bag or Belt)
| Section | Length | Purpose |
|---|---|---|
| A | 14cm | Front panel or main decorative area |
| B | 15cm | Back panel or adjustable strap |
| 6cm | 6cm | Center connector or width |
| 2cm | 2cm | Fold-over seam or fringe length |
Scenario 3: Jig or Template for Tying
In macrame, you often create a tying jig (as in your LIND-Z pattern). This diagram could be the blueprint for a jig:
| Measurement | Jig Use |
|---|---|
| 6cm | Distance between two pegs for a small loop |
| 14cm | Main peg-to-peg distance for the bracelet body |
| 15cm | Maximum working length (including slack) |
| 2cm | Extra space for tightening |
How-To Guide: Using This Diagram for a Purple Macrame Bracelet
Let me assume this diagram is for a two-section bracelet with a loop closure — a common project type that fits your artisanal purple theme.
Step 1 — Determine the Project
Based on the numbers, you are making:
- A main body (14cm long)
- A loop end (2cm diameter or length)
- Total finished length approximately 15–16cm (suitable for a small to medium wrist, or an anklet)
Step 2 — Gather Materials
| Material | Specification |
|---|---|
| Purple macrame cord | 2–3mm thickness |
| Length needed | Approx. wrist size × 1.5 to 2 (e.g., 16cm wrist → 24–32cm of cord per strand) |
| Number of strands | Depends on pattern; typical: 4 to 8 strands |
Step 3 — Create the A Section (14cm)
Using your preferred knot (square knot, cobra, or shark jaw):
- Tie a knotted section exactly 14cm in length
- This becomes the main decorative body of the bracelet
Step 4 — Create the B Section (15cm)
The B section may be:
- Option 1: The other half of the bracelet (e.g., the back side or the adjustable tail)
- Option 2: A second identical panel that will be joined to the first
If B = 15cm and A = 14cm, the B section is 1cm longer — possibly for an adjustable sliding knot.
Step 5 — Add the 2cm Loop
At one end of the A section, create a 2cm loop:
- Fold the cords back and tie a knot
- The loop should be large enough to pass a button or diamond knot through
Step 6 — Add the 6cm Element
The 6cm measurement could be:
- A center decorative panel (e.g., a monkey’s fist or Pan Chang knot that is 6cm in circumference)
- The width of the bracelet (if it is a wide cuff)
- A separate small section (like a connector between A and B)
If it is a width measurement, your purple bracelet should be 6cm wide at its widest point.
Step 7 — Assemble
Follow the diagram’s layout:
- Start with the 2cm loop
- Then tie the 14cm A section
- Add the 6cm center element (if separate)
- Finish with the 15cm B section
Step 8 — Final Adjustments
Measure the finished project. Adjust knot tension so the sections match the diagram’s dimensions exactly.
Common Mistakes & Fixes
| Mistake | Cause | Fix |
|---|---|---|
| Sections don’t match diagram | Knot tension inconsistent | Use a ruler as you tie; check every 2cm |
| 2cm loop too small/big | Guessed instead of measured | Use a 2cm-wide template (e.g., a coin) to form the loop |
| 6cm width too wide for wrist | Misinterpreted measurement | 6cm is very wide for a bracelet; consider this might be a bag handle instead |
| A and B sections reverse | Mislabeled which end is which | Mark A and B on your project with tape |
Connecting to Your Previous Patterns
| Pattern | How No.1229 Could Be Used |
|---|---|
| Square knot bracelet | A = 14cm of square knots, B = 15cm of half-knots |
| Shark jaw bone | A = 14cm of shark jaw, B = 15cm of cobra finish |
| LIND-Z | A = 14cm of dense Z-weave, 2cm loop |
| Pan Chang knot | Place a 6cm Pan Chang knot in the center |
| Monkey’s fist | Use the 6cm measurement for the fist’s diameter |
Sample Project: Purple Artisanal Bracelet Using No.1229
Design:
- 2cm loop: Deep purple cord, single overhand knot
- 14cm A section: LIND-Z weave (dense diagonal) in light and dark purple
- 6cm center: Pan Chang knot in medium purple (approximately 6cm wide after tightening)
- 15cm B section: Shark jaw bone weave in lavender and violet
- Closure: Diamond lanyard knot (as in the shark jaw guide) that passes through the 2cm loop
Total finished length: Approximately 31cm (too long for a wrist — so this may actually be a lanyard or necklace)
Given the total of A+B (14+15=29cm) plus the loop and center, this project is likely a long lanyard, sunglass strap, or small bag handle, not a standard bracelet.
Final Pro Tip: Always Verify the Project Type
The diagram No.1229 does not specify what you are making. Before cutting cord:
- Check if the original source (book, magazine, or website) had a title or photo
- If 14cm + 15cm = 29cm is longer than your wrist (typically 15–20cm), then this is not a bracelet — it is a lanyard, belt, or strap
- Adjust the measurements proportionally for a bracelet: scale down by dividing all numbers by 2 (e.g., 7cm A, 7.5cm B, 3cm center, 1cm loop)
Summary: What No.1229 Teaches You
| Lesson | Takeaway |
|---|---|
| Patterns use letters (A, B) to label sections | Each section may have a different knot or color |
| Small measurements (2cm) are usually loops or margins | These are critical for closures and fit |
| Center measurements (6cm) are often focal points | Ideal for decorative knots like Pan Chang or monkey’s fist |
| Always verify total length before starting | 29cm is a lanyard, not a bracelet |
